Chemical Tanker Ship Model with Coated Tanks

chemical tanker ship model

Thirty-four tanks, and every one carries something different.

A chemical tanker ship model has to explain that fragmentation. One big tank would be simpler to build and completely wrong.

chemical tanker ship model

Tank Layout and Coating Colour

Coatings are the story. Stainless, zinc silicate, epoxy and phenolic each read differently, and crews recognise their ship by the coating map.

Individual tanks, individually marked

We model every tank boundary visible on the deck plan, with slop tanks aft and the cofferdam between cargo and machinery spaces.

Coating tones that mean something

Light grey for stainless, pale pink for zinc silicate, buff for epoxy, and a darker tone for phenolic. The palette comes from your coating schedule, not from a generic chart.

Deck piping per tank

Chemical carriers run more lines than crude tankers. We show one line per tank group and mark the crossover valves, which is where operators usually point first.

Scale and Footprint

  • 1:200 – a 150 m chemical tanker runs 750 mm, good for office use.
  • 1:150 – 1000 mm, the best compromise for tank and piping detail.
  • 1:100 – 1500 mm, used for training rooms where the cutaway matters.

Width at 1:150 is around 155 mm. Ships with wide cargo decks need a wider base plate, so check table width before choosing scale.

Cutaways for Training

The most requested cut is at the cargo tank amidships, showing the tank wall, the heating coil and the tank cleaning machine. We build the cleaning machine as a small separate part that can be lifted out.

For crew familiarisation, the pump room opens from the aft face. Two pumps, the stripping line and the cofferdam all remain visible without dismantling the deck.

Questions from Chemical Tanker Buyers

Can you match our coating schedule exactly?

Yes. Send the schedule and we match the colours at the 3D review. Where a coating is not visible from outside, we mark it only on the cut face.

How many tanks can the model show?

All of them, as boundaries. Individual interior detail is limited to the cutaway tank and the pump room, because more would push the build past 40 days.

Is stainless piping a problem at this scale?

No. We use nickel-silver tube, which holds a bright finish and keeps its shape. Brass would tarnish and read as copper at 1:150.

The cable lay vessel case study shows the same deck piping discipline, and our custom ship model service covers the full tanker range.

Send your coating schedule and deck plan to the contact page for a fixed quote in one working day.