Twelve decks. One stern ramp. Nothing else matters.
A car carrier ship model lives or dies on whether the ramp reads as a ramp and the decks read as decks. Get those two right and the model works at any size.

Decks, Ramps and the Box That Floats
A PCTC is a tall box. The hull is simple, the superstructure is small, and the whole interest sits in the internal ramps that connect twelve decks.
Making decks visible
We cut the hull side open on one face and show four to six decks in section. The rest stay closed. Full internal detail is possible but reads as noise, because every deck looks the same from two metres away.
The stern ramp
Built as a folded plate with a hinge, resting at the angle in your stowage plan. The ramp is the one part buyers touch, so it is built from sheet metal rather than printed plastic.
Cars on the top deck
Optional. We place 12 to 20 simplified vehicles on the uppermost deck only. More than that and the model starts to look like a toy shop rather than a ship.
Sizes and Scale Trade-offs
- 1:200 – a 199 m PCTC runs 995 mm, the practical default.
- 1:150 – 1327 mm, better for ramp and deck detail.
- 1:250 – 796 mm, for shelf display where height matters more than length.
Height at 1:200 is about 190 mm including the funnel. That height, not the length, is what makes a PCTC hard to fit in a standard case.
Build Method
- Send the GA plan, capacity plan and one deck arrangement.
- Receive a fixed quote in one working day.
- Approve the cutaway extent in a 3D review, since that drives cost.
- Build in 22 to 32 days and crate in two sections at the cut line.
Questions from Car Carrier Operators
Can you show loading at a specific berth?
Yes, with the ramp landed on a quay section. We build a small quay insert at the same scale, linked to the ship by the ramp.
Will the cutaway weaken the model?
No. We add an internal frame at the cut line and keep each section under 20 kg. The cut face gets a painted edge so it reads as a section, not a break.
Which decks do you usually open?
Deck 3 to deck 6. That band shows the ramp run without exposing the empty upper decks, which is where most cutaways lose visual interest.
Our bulk carrier ship model uses the same open-hold logic, and the custom ship model service covers ro-ro and ro-pax hulls.
Send your capacity plan through the contact page for a fixed quote in one working day.






