Cable Laying Vessel Model with Carousel and Trenching Gear

cable laying vessel model

The visible part of a cable laying vessel is the carousel. Everything else is a ship with a very large spool on deck.

A cable laying vessel model lives or dies on the carousel, the tensioner and the deck path. Build those flat and the model becomes a generic offshore boat.

cable laying vessel model

Carousel, Tensioner and Deck Path

The cable runs from the carousel through the tensioner, over the stern chute and into the water. That path is the model’s spine.

Carousel

At 1:150 a 7000 tonne carousel is roughly 200 mm across. We build it open-topped with visible coils, so the eye reads a full drum rather than a solid cylinder.

Tensioner and rollers

Two tracks and four guide rollers on the centreline. We set the tracks closed, with a short cable section passing through, which is how the machine looks in operation.

Stern chute and plough

The chute hangs over the stern at the working angle. Ploughs and ROV launch gear ship as separate deck items, since they change from project to project.

Scales and Deck Space

  • 1:150 – a 130 m vessel runs 867 mm, good for carousel detail.
  • 1:200 – 650 mm, standard for tender presentations.
  • 1:100 – 1300 mm, used where the deck path must be modelled in full.

The carousel dominates the deck at any scale. Under 600 mm long, order a simplified carousel rather than a detailed one that disappears.

Build and Handling

Carousels are removable drums with the cable modelled as stacked strand in two tones. The drum sits in a bearing ring, so it can be turned by hand during a presentation.

That is the one moving part we encourage, because clients always turn it.

Questions from Cable Contractors

Can you show a specific cable route?

Yes, on a seabed insert. We model the route as a shallow trench line with markers, and the vessel sits at the lay position.

Can the model include an offshore substation?

Yes. The substation is a compact jacket at the same scale, usually placed 200 mm ahead of the vessel on the base.

How heavy is a 1:150 model?

Around 12 to 18 kg, depending on the drum and whether a seabed insert is included.

The cable lay vessel case study covers the 1:200 version of this ship, and the custom ship model service covers offshore construction vessels.

Send your deck layout and lay plan to the contact page for a fixed quote in one working day.